Description
2 - HARD PLASTIC ADHESION PROMOTER / FILM HARDENER ANGELUS
Angelus 2-Hard Additive mixes with Angelus Leather Paint to paint on non-porous, hard surfaces like plastic, glass or metal.
This product is ideal for customizing all parts of your sneakers, such as eyelets or logos for example.
The 2-hard product increases the adhesion and resistance of the paint to the support.
Usage tips :
- For a slightly flexible surface (e.g. plastic on shoes): mix 50% Angelus acrylic leather paint with 50% 2-Hard additive.
- For a completely rigid surface (e.g. glass or metal): mix 25% Angelus acrylic leather paint with 75% additive 2 -Hard.
- To easily mix the preparation, you can use a paint palette (ref. TA966 ).
- Light sanding with a fine-grained abrasive sheet is recommended to improve adhesion to the surface.
- Apply several thin coats with a brush until you obtain the desired result. Allow the Angelus paint to dry thoroughly between two coats. Leave to dry for at least 48 hours after the last coat.
- Wash your brush with soap and warm water.
Warning : Does not work on rubber soles.
Capacity : 29 ml (1 fl oz) or 118 ml (4 fl oz)
Keep out of reach of children
Made in the USA by Angelus
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
