PINCE 300 kit for installing large eyelets and 4 installation sets

PACK CLAMP 300 + 4 DIES

This pliers is used to set eyelets from 6.5mm to 12.5mm in diameter.
It is used with a specific installation set "for Pliers 300" different for each size of eyelet (4 sizes available).

Available eyelet diameters: 6.5 - 8.5 - 10- 12.5 mm

Steel clamp - nickel-plated finish for the lower part and metallic blue for the upper part.
Maximum dimensions of the open clamp: 30 x 18 cm.

The clamp is supplied with 4 sets of fittings . Diameters: 6.5 - 8.5 - 10 -12.5 mm
Eyelets not supplied

Using the pliers (we invite you to watch the video):
1. Insert the two parts of the desired eyelet installation set (be careful not to mix up the two parts)
For information, the installation sets for eyelets with diameters of 6.5 and 8.5 mm are fixed by magnetism, the diameters of 10 and 12.5 mm must be screwed
2. Punch the hole in the material with a hole punch (sold separately)
3. Insert the eyelet into the hole in the material, place the eyelet washer and place the eyelet in the center on the lower die part
4. Press the eyelet with the pliers and you're done!

Die sets are for use with 300 Plier Eyelets.
Perfect use cannot be guaranteed for eyelets from another manufacturer, as eyelets differ from manufacturer to manufacturer.

The eyelet pliers can pierce thin leather (less than 0.5mm). You can remove the cut leather from the lower die with a round awl.

Supplied with instructions for use in French, German and English
Suitable for children over 8 years old

Made in Germany