PLIERS 300 for setting Eyelets Diameter 6.5 - 8.5 - 10 - 12.5 mm

300 PLIERS FOR EYELETS

This plier is used to install eyelets from 6.5 mm to 12.5 mm in diameter.
It is used with a specific installation set "for Pliers 300" different for each eyelet size (4 sizes available).

Available eyelet diameters: 6.5 - 8.5 - 10 - 12.5 mm

Steel pliers - nickel-plated finish for the lower part and metallic blue for the upper part.
Maximum dimensions of the open clamp: 30 x 18 cm.

The clamp is delivered without installation set or eyelet

Using the pliers (we invite you to watch the video) :

1. Insert the two parts of the desired eyelet installation set (be careful not to interchange the two parts)
For information, the installation sets for eyelets diameter 6.5 and 8.5 mm are fixed by magnetization, diameters 10 and 12.5 mm must be screwed
2. Punch the hole in the material with a cookie cutter (sold separately)
3. Insert the grommet into the hole in the material, place the grommet washer and place the grommet in the center on the lower die part
4. Press the eyelet with the pliers and you're done!

Die sets are intended for use with 300 plier eyelets.
Perfect use cannot be guaranteed for eyelets from another manufacturer, as the eyelets differ from manufacturer to manufacturer.

The pliers can pierce thin leather (less than 0.5mm). You can remove the cut leather from the bottom die using a round awl.

Delivered with instructions for use in French, German and English
Suitable for children over 8 years old

Made in Germany