Description
AIRBRUSH COMPRESSOR
This high performance 1 piston compressor , with double fans, allows the use of an airbrush.
It can be used with airbrush needles ranging from 0.2 to 1.05mm.
It is equipped with 2 cooling fans to enable continuous and long-lasting work.
It has a pressurized air tank: it stops after reaching the required pressure and turns on again when the pressure is low.
The operating pressure is easily adjusted thanks to the precise pressure gauge at 0.2 bar for efficient use of your airbrush.
It is equipped with 2 cooling fans to enable continuous and long-lasting work.
It has a pressurized air tank: it stops after reaching the required pressure and turns on again when the pressure is low.
The operating pressure is easily adjusted thanks to the precise pressure gauge at 0.2 bar for efficient use of your airbrush.
Technical characteristics :
- Single-cylinder engine, oil-free, ventilated
- Power: 1/6 HP - 125W
- Flow rate: 20 - 23 L/min
- Power: 1/6 HP - 125W
- Flow rate: 20 - 23 L/min
- Adjustable pressure via pressure gauge up to 4.5 bar
- Automatic stop at 4.5 bar, automatic restart at 3.5 bar
- Automatic stop at 4.5 bar, automatic restart at 3.5 bar
- Thermal protection: automatic shutdown in case of overheating
- Air tank: 3 L
- 1/8" male connector output
- Rotation speed: 1450 - 1700 rpm
- 47 decibels (silent)
- Mains input: 220-240 Volts
Dimensions :
- Length: 21cm
- Width: 14cm
- Height: 32cm
- Weight: 4.85 kg
- Power cord length: 1.70 m
It has a handle for easy transport.
Information :
- It is necessary to regularly purge the condensate accumulated in the moisture separator, by pressing the purge when the compressor is running (see the video at 3:38) .
- To use a Paasche Millenium airbrush with this compressor, it is necessary to add the female 1/8" compressor reducer, male 1/4" (ref. TA841) to be able to connect them.
- Air tank: 3 L
- 1/8" male connector output
- Rotation speed: 1450 - 1700 rpm
- 47 decibels (silent)
- Mains input: 220-240 Volts
Dimensions :
- Length: 21cm
- Width: 14cm
- Height: 32cm
- Weight: 4.85 kg
- Power cord length: 1.70 m
It has a handle for easy transport.
Information :
- It is necessary to regularly purge the condensate accumulated in the moisture separator, by pressing the purge when the compressor is running (see the video at 3:38) .
- To use a Paasche Millenium airbrush with this compressor, it is necessary to add the female 1/8" compressor reducer, male 1/4" (ref. TA841) to be able to connect them.
Instructions (in English) to be read before use.
Do not use for purposes other than those for which this device was designed.
Made in China
Do not use for purposes other than those for which this device was designed.
Made in China
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
