THE NECESSARY MATERIAL
To complete this tutorial you will need:- 1 piece of leather 20 x 30 cm - firm - thickness between 1.2 mm and 1.5 mm
- A T3 collar button
- OR a Ø 12 mm or Ø 15 mm snap button
- 1 cutter or a pair of scissors
- A round cookie cutter of Ø 3 mm
VIDEO
1. Report the pattern
Cut out the pattern and transfer it onto a piece of leather. Also transfer the two slits and the location of the holes.
2. Cut the slots
Using a cutter, cut the two slits 7 cm long.
3. Cut the leather
Then cut out the entire piece following the outline.
4. Drill the holes
Drill the various 3 mm diameter holes using a round punch.
5. Assemble the mini-pouch
Tuck the legs into the slots.
 |
 |
6. Place the clasp
OPTION #1: The collar button
Insert the 3 x 7 mm screw of the collar button from the inside (in the three holes), then screw the collar button.
Using a cutter, make a slot for the collar button head to pass through.
OPTION N°2: the snap button
Place the foot of the snap fastener in the three holes. And place the head of the snap fastener on the hole in the flap of the mini-pouch.
You're done!
|
 |
ANOTHER VERSION OF A LEATHER WALLET
Also discover our other version of the seamless card holder wallet.
Final dimensions:
- Length: 10 cm
- Width: 6.7 cm
