Description
DIAMOND TIP LEATHER COUTURE LABEL
This striking claw allows you to make a diamond-shaped hole with a single stroke of the mallet , thanks to its diamond tip .
This tool replaces the awl with pliers to make the saddle stitch.
The blade is made of tempered steel and the handle of black chrome steel, treated to prevent surface corrosion.
It has a very high wear resistance.
Dimensions :
- Total length of the tool: 11.2 cm
- Blade length for maximum thickness: approximately 10 mm
- Stitch width: 2.5 mm
For information, this 1-tooth claw is common to the series:
- 88044 (centre distance 4.1 mm) - Ref. TA493
- 88045 (5.1 mm center distance) - Ref. TA494
- 88046 (center distance (6.4 mm) - Ref. TA495
Reference of this article: 88043-00
Suitable for children over 8 years old
Made in Taiwan
Which spacing should I choose for my creation ?
The center distance is the distance between two points: it is to be chosen according to the item you wish to create (aesthetic choice).
The different center distance / wire diameter combinations give different aesthetic results: the choice is yours!
Table given for information only:
| leather item | Total leather thickness | center distance | Wire diameter |
| Small item (e.g. bookbinding, small leather goods) | Max. 2.5mm | 2.5 to 3.38mm | 0.30 to 0.53mm |
| Medium item (e.g. leather goods) | Max. 4mm | 3.38 to 3.85mm | 0.54 to 0.70mm |
| Large item (e.g. furnishings, saddlery, luggage) | Max. 7mm | 4 to 6.75mm | 0.76 to 1.30mm |
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
